JCB .3CX-2 France AXLES FRONT
| # | Part No. | Description | Qty |
|---|---|---|---|
| 0 | 82*****60 | Bolt, M14 x 70mm long | 8 |
| 0 | 91*****04 | Circlip | 1 |
| 0 | 45*****02 | Carrier, annulus | 1 |
| 0 | 91*****02 | Shaft, axle side, 476.0mm long | 1 |
| 0 | M.**S. | Multi Supersession | 1 |
| 0 | 44*****01 | Joint, knuckle swivel, track rod; Replaced by 448/13302 + 904/50047, SeeSAN09738 | 1 |
| 0 | 91*****03 | Joint, centre; USE 914/83304, SAN 04410 | 1 |
| 0 | 91*****01 | Shaft, hub side, 244.5mm long; Replaced by mss 914/87801 + 821/00494, See SAN08824 | 1 |
| 0 | 91*****01 | Shaft, axle side, 926.0mm long | 1 |
| 0 | 44*****01 | Joint, knuckle swivel, track rod; Replaced by 448/13302 + 904/50047, SeeSAN09738 | 1 |
| 0 | 45*****03 | Dowel, hollow | 8 |
| 0 | 44*****01 | Joint, knuckle swivel, track rod; Part is now MSS use the following 448/13301 x, 1, 450/12702 x1, 826/01060 x8, 450/12703 x8. | 1 |
| 1 | 44*****01 | Joint, kuckle swivel, steer ram/track rod; Part is now MSS use the following 448/13201 x, 1, 450/12702 x1, 826/01060 x8, 450/12703 x8. | 1 |
| 1 | M.**S. | Multi Supersession | 1 |
| 1 | 44*****01 | Joint, knuckle swivel, ram/track rod; Replaced by 448/13202 + 904/50047, See SAN09738 | 1 |
| 1 | 45*****03 | Dowel, hollow | 8 |
| 1 | 45*****02 | Carrier, annulus | 1 |
| 1 | 44*****01 | Joint, knuckle swivel, ram/track rod; Replaced by 448/13202 + 904/50047, See SAN09738 | 1 |
| 1 | 82*****60 | Bolt, M14 x 70mm long | 8 |
| 2 | 45*****02 | Trunnion; Replaced by 453/00304, See SAN05802 | 4 |
| 3 | 92*****04 | Shim, 0.76mm | 4 |
| 3 | 92*****03 | Shim, 0.25mm | 4 |
| 3 | 92*****01 | Shim, 0.08mm | 4 |
| 3 | 92*****02 | Shim, 0.13mm | 4 |
| 4 | 90*****00 | Bearing, taper roller | 4 |
| 5 | 90*****00 | Seal | 4 |
| 6 | 13******9Z | Bolt, M12x35 Grade 8.8 | 16 |
| 6 | 13*****09 | Bolt | 16 |
| 6 | 13*****09 | Bolt | 16 |
| 7 | 81*****56 | Nipple, grease | 4 |
| 8 | 91*****00 | Shaft, drive assembly, 790mm long; Replaced by 914/87900 + 821/00494, See SAN08701 | 1 |
| 8 | 91*****00 | Shaft, drive assembly, 1240.1mm long; Replaced by MSS 914/87800 + 821/00494, See SAN08701 | 1 |
| 9 | 91*****06 | Kit-spider, 82mm over caps, 30mm cap diameter | 2 |
| 10 | 91*****05 | Nipple | 2 |
| 11 | 91*****00 | Pin, pivot, 105mm x 25mm dia. | 3 |
| 13 | 13******5Z | Screw, M10 x 20mm long | 3 |
| 14 | 41*****02 | Sealant, Locking | 1 |
| 15 | 91*****00 | Bearing | 2 |
| 16 | 90*****09 | Seal | 2 |